New: free Santa, snowman, tree, nutcracker and stocking charts →
Free chart

Learn / Needlepoint

Needlepoint · learn · updated 2026-11-08

Needlepoint for beginners: the complete free guide

Needlepoint is stitching wool or cotton thread over an open-weave canvas, one small diagonal tent stitch over each crossing of canvas threads. To start you need a 13-mesh mono canvas, a size 20 tapestry needle, thread such as tapestry wool or 6 to 8 strands of DMC floss (stranded cotton), and a chart or painted design.

Main stitchTent stitch: one diagonal stitch over one canvas intersection
Best first canvas13 mesh (13 holes per inch)
NeedleSize 20 tapestry needle for 13 mesh, size 22 for 18 mesh
ThreadTapestry wool, pearl cotton #3, or 6-8 strands of DMC floss on 13 mesh
Size ruleFinished inches = chart squares ÷ mesh

What needlepoint is

Needlepoint is a counted or painted stitch worked on stiff, open canvas. The canvas is a grid of threads with holes between them. Each stitch crosses one point where a vertical and a horizontal thread meet.

The basic stitch is the tent stitch: a short diagonal that slants from lower left to upper right. Rows of tent stitches cover the canvas completely, so the finished piece is dense and hard-wearing. That is why needlepoint is used for ornaments, pillows, belts and framed pictures.

Most beginners use mono canvas, which has single threads and even holes. The number of holes per inch is the mesh. A 13-mesh canvas has 13 holes per inch; an 18-mesh canvas has 18.

Four continental tent stitches worked right to left on mono canvas: front with numbered holes and needle arrows, the back seen through the canvas with long dashed slants from each even hole to the next odd hole, and a second row worked after turning the canvas.Continental tent stitchWorked right to left. Every stitch slants / over one canvas intersection.Threadon the frontSolidfront: needle goes DOWN at the tipDashedback: needle comes UP at the tipAFront: row 112345678work right to leftBBack of the same row, seen through12345678Each back stitch runs from a down hole to the next up hole (2 to 3, 4 to 5, 6 to 7): a long slant overtwo threads, so the back is well padded.CRow 2: turn the canvas half a turnrow 1row 2In your hands you still work right to left. Seen the original way up, row 2 runs left to right and sharesthe holes of row 1. Every stitch still slants /.
Four continental tent stitches worked right to left on mono canvas: front with numbered holes and needle arrows, the back seen through the canvas with long dashed slants from each even hole to the next odd hole, and a second row worked after turning the canvas.Continental tent stitchWorked right to left. Every stitch slants / over onecanvas intersection.Threadon the frontSolidfront: needle goes DOWN at the tipDashedback: needle comes UP at the tipAFront: row 112345678work right to leftBBack of the same row, seen through12345678Each back stitch runs from a down hole to the nextup hole (2 to 3, 4 to 5, 6 to 7): a long slant over twothreads, so the back is well padded.CRow 2: turn the canvas half a turnrow 1row 2In your hands you still work right to left. Seen theoriginal way up, row 2 runs left to right and sharesthe holes of row 1. Every stitch still slants /.
Continental tent stitch: up at the lower left, down at the upper right.

What you need to start

SupplyWhat to buy firstWhy
Canvas13-mesh mono canvasBig holes, easy to see and count
NeedleSize 20 tapestry needleBlunt tip slips through holes without splitting thread
ThreadTapestry wool, pearl cotton #3, or DMC six-strand floss (6-8 strands)Thick enough to cover 13 mesh
FrameStretcher bars about 2 in bigger than the design each wayKeeps the canvas square and tight
ExtrasMasking tape, waterproof marker, small scissorsTape the edges, mark the center, trim ends

Leave 2 to 3 inches of bare canvas on every side of the design. Our charts call for 3 inches, which leaves room for blocking and framing.

Painted canvas or chart?

There are two ways to know which color goes where. A hand-painted canvas has the design painted on the canvas itself. You stitch over the paint. They are lovely but often cost $80 or more, because each one is painted by hand.

A chart is a grid on paper or screen. One square on the chart is one tent stitch on the canvas. You count squares and holes. Charted needlepoint costs only the canvas and thread, and it lets you stitch designs like our 26-building Christmas village from a free chart.

How to start your first piece

  1. Cut the canvas with 2 to 3 inches extra on every side and tape the edges.
  2. Mark the center of the canvas and find the center of the chart.
  3. Mount it on stretcher bars.
  4. Start the thread with a waste knot, then work continental tent stitch on small areas.
  5. Use basketweave for large areas, end threads by weaving under the back, then block the finished piece.

The full walk-through is in how to needlepoint, step by step.

Cut the canvas to the design size plus 2 to 3 inches of bare canvas on every side and tape the raw edges. Fold it in quarters to find and mark the center before mounting, or measure. Tack it drum-tight onto stretcher bars, then start from the center of the chart.Get the canvas readyBefore the first stitch: cut, tape, mark the center, then mount.ACut and tapedesign area2–3 intape over the raw edgesDesign size = stitches ÷ mesh. Add 2–3 in ofbare canvas on every side and cut along astraight thread.BMark the center, then mountcenterstretcher bars, canvas drum-tightMark the center: fold in quarters beforemounting, or measure.Start from the center of the chart (the arrowson its edges) and count outward.
Cut the canvas to the design size plus 2 to 3 inches of bare canvas on every side and tape the raw edges. Fold it in quarters to find and mark the center before mounting, or measure. Tack it drum-tight onto stretcher bars, then start from the center of the chart.Get the canvas readyBefore the first stitch: cut, tape, mark the center,then mount.ACut and tapedesign area2–3 intape over the raw edgesDesign size = stitches ÷ mesh. Add 2–3 in of barecanvas on every side and cut along a straightthread.BMark the center, then mountcenterstretcher bars, canvas drum-tightMark the center: fold in quarters beforemounting, or measure.Start from the center of the chart (the arrows onits edges) and count outward.
Cut, tape, mark the center and mount before the first stitch.

All needlepoint guides

13 vs 18 mesh: which needlepoint canvas?13 mesh has 13 holes per inch and is easier for beginners: use a size 20 needle and thick thread such as 6 to 8 strands of DMC floss…Basketweave needlepoint stitch: diagonal rows and a woven backBasketweave is a tent stitch worked in alternating diagonal rows.How to stitch a needlepoint Christmas village from a chartPick one building chart, stitch it in tent stitch on 13 mesh (about 12 x 11 in) or 18 mesh (about 9 x 8 in), working from the chart square…Continental stitch needlepoint: how to work each rowContinental stitch is a needlepoint tent stitch worked in straight rows.Can you use a cross stitch chart for needlepoint?Yes.How to finish a needlepoint ornament yourselfBlock the stitched canvas, trim it to leave about 1/2 to 3/4 in of bare canvas, fold that over a board cut to the ornament's shape, cover a…How to finish a needlepoint stockingBlock the stitched stocking, trace its last stitched row onto paper and add 1/2 in of seam allowance.Needlepoint finishing: choose and prepare your final projectNeedlepoint finishing turns a stitched canvas into a usable or displayable object.How much thread or yarn do you need for needlepoint?Plan about 1.5 to 2 yards of thread for every square inch of tent stitch, then add 10% for decorative stitches and waste.How to needlepoint: a step-by-step beginner guideCut your canvas 2 to 3 inches bigger than the design on every side, tape the edges and tack it to stretcher bars.Needlepoint needle size chartUse a blunt tapestry needle matched to the mesh: size 18 for 10 mesh, size 20 for 12 to 14 mesh (including 13), size 22 for 16 to 18 mesh…How to needlepoint letters and namesChoose an alphabet chart sized for your space, add up each letter's width plus the gaps between letters, and match the middle stitch of the…Needlepoint stitches: continental, basketweave and half crossAll three are tent stitches that look the same on the front.Needlepoint vs cross stitch: what's the difference?Needlepoint is worked in tent stitch with wool or thick thread on stiff canvas and covers every hole, making a dense, durable textile…How to start and end a needlepoint threadDon't leave knots on the back.Tent stitch needlepoint: half cross, continental and basketweaveTent stitch is a single diagonal needlepoint stitch over one canvas intersection.

Questions

Can you teach yourself needlepoint?

Yes. Most stitchers learn from written guides and short videos. Learn continental tent stitch first, then basketweave. A small 13-mesh piece teaches you everything you need.

What is the easiest needlepoint stitch for a beginner?

The continental tent stitch. It is one short diagonal over one canvas intersection, worked in rows. It covers the canvas completely and works for small details and lettering.

Is 13 or 18 mesh easier?

13 mesh is easier for most beginners. The holes are bigger, the thread is thicker and the piece grows faster. 18 mesh gives finer detail but takes about twice as many stitches per square inch.

Why is needlepoint so expensive?

Mostly because hand-painted canvases are painted one at a time by an artist, and good wool and silk threads add up. Stitching from a chart on plain canvas costs far less.

Is needlepoint the same as cross stitch?

No. Cross stitch makes an X on soft fabric like Aida and leaves gaps. Needlepoint uses a single diagonal tent stitch on stiff canvas and usually covers it completely. One chart square still equals one stitch in both.

More guides