New: free Santa, snowman, tree, nutcracker and stocking charts →
Free chart

Learn / Needlepoint / Can you use a cross stitch chart for needlepoint?

Needlepoint guide · updated 2026-11-08

Can you use a cross stitch chart for needlepoint?

Yes. Each square on a cross stitch chart becomes one tent stitch on needlepoint canvas, so you just count and stitch. The size changes with the mesh (a 156-stitch-wide chart is 11.1 in on 14-count Aida but 12.0 in on 13 mesh), backstitch and fractional stitches are dropped or simplified, and you choose a background fill and a thicker thread.

Rule1 chart square = 1 tent stitch
SizeInches = stitches ÷ mesh
Drop or simplifyBackstitch outlines, quarter and three-quarter stitches
DecideBackground fill (or bare canvas) and thread thickness

Why it works

Cross stitch and needlepoint charts are the same kind of grid. In cross stitch one square is one X on Aida. In needlepoint one square is one tent stitch on canvas. The color key, the symbols and the counting all carry over.

The thing that changes is the fabric. Canvas is stiff and open, and needlepoint usually covers every hole. That's why a few chart features need adjusting.

Needlepoint works one diagonal tent stitch over each canvas intersection, covering every hole of stiff canvas. Cross stitch makes a full X over each Aida square, and the fabric can show. One chart square is one stitch in either craft; 14-count and 14-mesh both give 14 stitches per inch.Needlepoint vs cross stitchSame chart, different stitch and fabric.ANeedlepointone diagonal per squareevery hole coveredTent stitch on stiff canvas, in wool or perlecotton. Thick and hard-wearing.BCross stitcha full X per squarefabric can showCross stitch on soft Aida, 2 strands of floss on14-count. Light and soft.COne chart for both1 chart square1 tent stitch1 cross=or14-count Aida and 14-mesh canvas both give 14 stitches per inch, so one chart works for bothcrafts.
Needlepoint works one diagonal tent stitch over each canvas intersection, covering every hole of stiff canvas. Cross stitch makes a full X over each Aida square, and the fabric can show. One chart square is one stitch in either craft; 14-count and 14-mesh both give 14 stitches per inch.Needlepoint vs cross stitchSame chart, different stitch and fabric.ANeedlepointone diagonal per squareevery hole coveredTent stitch on stiff canvas, in wool or perle cotton.Thick and hard-wearing.BCross stitcha full X per squarefabric can showCross stitch on soft Aida, 2 strands of floss on14-count. Light and soft.COne chart for both1 chartsquare1 tentstitch1 cross=or14-count Aida and 14-mesh canvas both give 14stitches per inch, so one chart works for bothcrafts.
One chart square is one tent stitch or one cross.

What changes

Chart featureCross stitchOn needlepoint canvas
Full stitchesOne X per squareOne tent stitch per square
SizeStitches ÷ Aida countStitches ÷ mesh: 13 mesh comes out a bit bigger than 14-count, 18 mesh a bit smaller
BackstitchFine outline linesUsually left out, or worked as a row of tent stitches or a backstitch on top after the tent stitch
Quarter and 3/4 stitchesSplit squaresNot possible on mono canvas; pick one color for the whole square
BackgroundFabric showsUsually filled with a background color; or leave bare canvas for a framed piece
Thread2 strands floss (stranded cotton) on 14-count6-8 strands on 13 mesh, 3-4 on 18 mesh, or tapestry wool

Charts with heavy backstitch and lots of fractional stitches lose the most detail. Bold, full-square designs convert best.

How to read the chart on canvas

There are two ways to place a chart, and both work.

  • From the center: find the center of the chart (most charts mark it with arrows on the edges). Fold the canvas in quarters or measure to find its center and mark one intersection with a waterproof pen. Start the nearest motif from there and count outward. This keeps the design centered.
  • From the top left: measure your margin (2 to 3 inches) in from the top and left edges, mark the first stitch and work across and down. This is simpler for rectangular designs if you have measured the canvas well.

Count holes, not threads: each tent stitch sits on one intersection. Work one color area at a time, and tick off rows on a printed copy so you don't lose your place. Pencil grid lines every 10 stitches on the canvas help on big charts.

Cut the canvas to the design size plus 2 to 3 inches of bare canvas on every side and tape the raw edges. Fold it in quarters to find and mark the center before mounting, or measure. Tack it drum-tight onto stretcher bars, then start from the center of the chart.Get the canvas readyBefore the first stitch: cut, tape, mark the center, then mount.ACut and tapedesign area2–3 intape over the raw edgesDesign size = stitches ÷ mesh. Add 2–3 in ofbare canvas on every side and cut along astraight thread.BMark the center, then mountcenterstretcher bars, canvas drum-tightMark the center: fold in quarters beforemounting, or measure.Start from the center of the chart (the arrowson its edges) and count outward.
Cut the canvas to the design size plus 2 to 3 inches of bare canvas on every side and tape the raw edges. Fold it in quarters to find and mark the center before mounting, or measure. Tack it drum-tight onto stretcher bars, then start from the center of the chart.Get the canvas readyBefore the first stitch: cut, tape, mark the center,then mount.ACut and tapedesign area2–3 intape over the raw edgesDesign size = stitches ÷ mesh. Add 2–3 in of barecanvas on every side and cut along a straightthread.BMark the center, then mountcenterstretcher bars, canvas drum-tightMark the center: fold in quarters beforemounting, or measure.Start from the center of the chart (the arrows onits edges) and count outward.
Mark the canvas center and start from the chart's center arrows.

Our charts already include a needlepoint version

You don't need to convert anything with our designs. Every free chart comes with a needlepoint version alongside the cross stitch one. The needlepoint chart has full squares only, yards per color, and finished sizes for 13, 14 and 18 mesh. The previews on our pages are computer simulations, not photos of stitched pieces.

That means you can stitch the whole 26-building Christmas village on canvas from free charts instead of hand-painted canvases, which often cost far more.

Step by step

  1. Check the stitch count Find the chart's width and height in stitches.
  2. Pick your mesh and work out the size Divide the stitches by the mesh. Add 2 to 3 inches on every side and cut the canvas.
  3. Simplify the chart Decide what to do with backstitch and fractional stitches, and choose a background color or leave bare canvas.
  4. Mark the centers Mark the center of the chart and the center intersection of the canvas.
  5. Stitch Count from the center and work one tent stitch per square, continental for details and basketweave for big areas.

Questions

How do I convert a cross stitch chart to needlepoint?

Stitch one tent stitch for each full square. Drop or simplify backstitch and fractional stitches, choose a background fill, and work out the new size by dividing the stitch count by your canvas mesh.

Can a cross stitch chart be used for needlepoint?

Yes. One square equals one tent stitch. Designs made of full squares convert best.

Do you start needlepoint in the middle?

Usually. Starting from the marked center keeps the design centered on the canvas. Starting top left also works if you measure your margins carefully.

Will my design be the same size in needlepoint?

Only if the mesh matches the Aida count. A chart stitched on 14-count Aida is slightly bigger on 13 mesh and about 22% smaller on 18 mesh.

Is needlepoint more difficult than cross stitch?

Not really. The tent stitch is a single diagonal, so it's simpler than an X. Needlepoint just covers more of the canvas, so pieces take longer.