New: free Santa, snowman, tree, nutcracker and stocking charts →
Free chart

Learn / Needlepoint / How to needlepoint letters and names

Needlepoint guide · updated 2026-11-11

How to needlepoint letters and names

Choose an alphabet chart sized for your space, add up each letter's width plus the gaps between letters, and match the middle stitch of the name to the center of the canvas. Stitch the letters first in continental tent stitch, then fill the background around them. Our stocking cuff uses a 7-stitch alphabet, 0.5 in tall on 13 mesh, so longer names fit.

Letter heightInches = stitches ÷ mesh
Our stocking cuff60 × 17 stitches; names up to 54 stitches wide
SpacingUsually 1 blank stitch between letters, a wider gap between words
StitchContinental tent stitch for letters, basketweave for the background
OrderLetters first, background last

Choose an alphabet chart

Tent stitch turns every curve into small steps, so letters always look a little pixelated. An alphabet that was charted on a grid will look cleaner than a font you draw freehand. Pick the style first (block, serif, script or a bubbly holiday font) and then check the height in stitches against the space you have.

Our 19 free alphabet charts include a stocking name alphabet with 7-stitch capitals for cuffs, and the needlepoint stocking alphabets collection gathers the ones that suit a stocking.

Letter height vs mesh

Mesh decides the letter size. Height in inches = stitches ÷ mesh.

Letter height13 mesh18 meshGood for
5 stitches0.4 in0.3 inDates and small words
10 stitches0.8 in0.6 inShort names on a cuff
12 stitches0.9 in0.7 inStocking names on a deeper cuff
20 stitches1.5 in1.1 inSingle initials, monograms
30 stitches2.3 in1.7 inLarge initials, pillows

Measure the space first. If the space has 14 free rows, a 10 or 12 stitch alphabet fits with 1 or 2 rows spare above and below. Long names may need a shorter or narrower alphabet. Chart the name before you start the rest of the stocking, so you know it fits.

Center a name

Centering is just counting.

  1. Write the name out and look up each letter's width in stitches on the chart.
  2. Add one blank stitch between letters and a wider gap between words. Some letter pairs, like a round O next to a straight letter, may look better with 2.
  3. Add it all up. That is the name's total width.
  4. Divide by two to find the name's middle stitch.
  5. Find the center of the space on the canvas: count the free threads across the cuff, or fold the canvas lightly.
  6. Line the two up. Many stitchers start at the middle letter and work outward to each side.

Example: JAMES in our Stocking Name capitals is 6, 6, 7, 6 and 6 stitches wide, plus 4 gaps of 2 stitches: 39 stitches. The middle is stitch 20, so put stitch 20 on the center of the cuff. If the total is even, the center falls between two threads; pick one side and stay consistent.

Center the name over the picture, not over the whole stocking, if the design sits off to one side.

The word NOEL charted in block letters: N 5, O 5, E 4 and L 4 stitches wide, plus one blank stitch between letters, is 21 stitches wide. Its middle stitch, number 11, is placed on the center line of the space.Center a name on canvasCount letter widths, add one blank stitch between letters, then match the middles.ANOEL on a 31-stitch spacecenter of the space11121name: 21 stitchesspace: 31 stitches1 blank stitch between lettersthe name's middle stitchBThe count1Add the widthsN 5 + O 5 + E 4 + L 4 = 182Add the gaps+ 3 blanks = 21 stitches3Find the middle21 ÷ 2 → stitch 11 is the middle4Line it upstitch 11 on the center of the space
The word NOEL charted in block letters: N 5, O 5, E 4 and L 4 stitches wide, plus one blank stitch between letters, is 21 stitches wide. Its middle stitch, number 11, is placed on the center line of the space.Center a name on canvasCount letter widths, add one blank stitch betweenletters, then match the middles.ANOEL on a 31-stitch spacecenter of the space11121name: 21 stitchesspace: 31 stitches1 blank stitch between lettersthe name's middle stitchBThe count1Add the widthsN 5 + O 5 + E 4 + L 4 = 182Add the gaps+ 3 blanks = 21 stitches3Find the middle21 ÷ 2 → stitch 11 is the middle4Line it upstitch 11 on the center of the space
In this drawing NOEL is 21 stitches wide with one blank between letters, so stitch 11 goes on the center line.

Fit a name in a stocking cuff

Our three free stocking charts share one cuff: a pale field 60 stitches wide and 17 rows tall, or 4.6 × 1.3 in on 13 mesh. The charted word NAME is 32 stitches wide and 7 rows tall, with 14 bare stitches on each side. We keep at least 3 bare stitches at each end, so a name can be up to 54 stitches wide.

Widths below include the gaps each alphabet uses: 2 stitches in Stocking Name, 1 in Traditional Sampler and Tiny 3x5.

NameStocking Name, capitalsStocking Name, upper and lower caseTraditional Sampler, upper and lower caseTiny 3x5, capitals
NOELLE45 (fits)40 (fits)33 (fits)24 (fits)
ELIZABETH67 (too wide)61 (too wide)52 (fits)35 (fits)
CHRISTOPHER84 (too wide)76 (too wide)69 (too wide)43 (fits)

Center it. Bare stitches on each side = (60 minus the name's width) ÷ 2. NOELLE in Stocking Name capitals is 45 wide, which leaves 15: put 7 bare stitches on the left and 8 on the right. Keep capitals on the same 7 rows as the charted NAME, with 6 pale rows above and 4 below. Lower case tails drop into the first of those 4 rows.

Long names. First try upper and lower case. Next, close the Stocking Name gaps from 2 stitches to 1: Elizabeth drops from 61 to 53. Then try Traditional Sampler, whose 11-stitch capitals and 3-row tails still fit the 17 rows. For the longest names, use Tiny 3x5. All three alphabets come from our stocking alphabets.

Letters first, then background

Most stitchers work the letters first and the background last. The letters fix your place, mistakes are easy to unpick before a background surrounds them, and you fill around them neatly at the end.

One exception: if the background is white or very pale and the letters are dark, some stitchers do the pale color first, so dark fibers don't catch in the light stitches. Either way, use a fresh needle hole and keep tension even so letter edges stay crisp.

Which stitch for letters

Use continental tent stitch for letters. It works in straight rows, so it handles single-stitch lines and thin strokes where basketweave can't run a diagonal. Use basketweave for the background, because it distorts the canvas less over big areas.

For extra-thin script, some stitchers outline in backstitch or use a slightly thinner thread. For bolder letters, a thicker thread fills the canvas better. Our alphabet charts are whole stitches only, so plain tent stitch works as printed.

Step by step

  1. Measure the space Count how many rows and threads are free where the name will go.
  2. Pick an alphabet Choose a chart whose letter height fits the rows, with 1-2 rows spare above and below.
  3. Count the name Add up letter widths plus one blank stitch between letters to get the total width.
  4. Find both centers Halve the total to find the name's middle stitch and match it to the center of the space.
  5. Stitch letters Work the letters in continental tent stitch, starting from the middle letter.
  6. Fill the background Fill around the letters, using basketweave for large areas.

Questions

How to needlepoint letters for beginners?

Use a charted alphabet and stitch each letter in continental tent stitch, one square at a time. Do the letters before the background, and count the whole name before you start.

What is the best needlepoint stitch for lettering?

Continental tent stitch. It works in rows, so it handles thin, single-stitch lines. Basketweave suits the background around the letters.

How do I add a name to a needlepoint stocking?

Chart the name from an alphabet, count its total width including spaces, and center its middle stitch on the center of the cuff. Stitch the name, then fill the cuff background.

How tall should needlepoint letters be?

Height = stitches ÷ mesh. Our stocking alphabet is 7 stitches tall (0.5 in on 13 mesh), so longer names fit a narrow cuff. A 10 or 12 stitch alphabet (0.8 or 0.9 in on 13 mesh) needs a deeper cuff.

Will a long name fit on a needlepoint stocking cuff?

On our stocking charts the cuff fits a name up to 54 stitches wide. ELIZABETH in 7-stitch capitals is 67 wide, so use upper and lower case with 1-stitch gaps, a narrower alphabet or Tiny 3x5.

Get the charts by email