Why a charted village
Christmas village needlepoint is one of the big trends in the craft. Le Point Studio's hand-painted village canvases, for example, sell for about $75 to $145 each (most around $80 to $90), come in 13 and 18 mesh, and restocks often sell out quickly. A painted canvas is lovely, but a whole street adds up fast.
A chart is the affordable way in. You buy plain mono canvas and yarn, and you count the design from a grid instead of following paint. Our 26 village buildings (a bakery, chapel, florist, lighthouse, post office, toy shop and more) are free needlepoint charts. Enter your email on finewaystudio.com and you get a Google Drive link with every craft version in 3 print sizes.
Pick 13 or 18 mesh
Mesh is the number of canvas threads, and tent stitches, per inch. The same chart gets smaller as the mesh goes up. Size in inches = stitches ÷ mesh.
| Building | Stitches (w x h) | 13 mesh | 18 mesh | Colors | Yarn |
|---|---|---|---|---|---|
| Bakery | 156 x 141 | 12.0 x 10.8 in | 8.7 x 7.8 in | 20 | 166 yd |
| Bookshop | 159 x 141 | 12.2 x 10.8 in | 8.8 x 7.8 in | 20 | 203 yd |
| Chapel | 150 x 152 | 11.5 x 11.7 in | 8.3 x 8.4 in | 18 | 123 yd |
| Florist | 158 x 125 | 12.2 x 9.6 in | 8.8 x 6.9 in | 20 | 202 yd |
| Lighthouse | 158 x 159 | 12.2 x 12.2 in | 8.8 x 8.8 in | 17 | 105 yd |
| Post Office | 160 x 151 | 12.3 x 11.6 in | 8.9 x 8.4 in | 18 | 214 yd |
13 mesh has bigger holes and is easier on the eyes. It makes a bold building about 12 in wide, good for a pillow or a framed piece. 18 mesh gives finer detail and a building about 9 in wide that sits well on a shelf or mantel. Our buildings are larger than many painted village canvases, so if you want a smaller house, choose 18 mesh.
Cut the canvas 3 in bigger than the design on every side. For the Bakery on 18 mesh that is about 15 x 14 in. Use the canvas size tool for any other mesh.
Transfer the chart (or don't)
Each colored square on the chart is one tent stitch over one canvas intersection. You have two ways to work.
- Stitch straight from the chart. Find the center of the canvas by folding it in four or drawing light diagonals, find the center arrows on the chart, and count out from there.
- Trace the outline first. Mark the building's outline and main shapes on the canvas with a fine permanent, waterproof marker, then fill in by counting. Test the marker first: draw on a scrap of canvas, let it dry, spray it with water and check it doesn't bleed. Use a pale gray or a color close to the yarn so it won't show through light stitches.
Printing the chart at the largest size and ticking off areas as you go helps a lot on a design with 20 colors.
Stitch order: details first
Start with the small details: windows, door, signs, wreaths and roof trim. They set your place on the canvas and are easy to unpick if you miscount. Then fill the walls and roof, and work the largest single-color areas last. Many stitchers also do the palest colors, such as snow and white trim, before dark ones so dark fibers don't drift into them.
Use continental stitch for single lines and small areas and basketweave for large areas, because basketweave pulls the canvas out of shape less.
Background: our charts add no background fill. Stitch only the building if you will cut it out for a standing house or ornament. If you want a framed panel, add a background in one color after the building is done. That needs extra yarn on top of the chart's list.
How much yarn you need
Every chart lists yards per color. Across the 26 buildings the totals run from about 105 yards (Lighthouse) to 214 yards (Post Office). One color usually dominates: the Bakery's darkest gray needs 34 yards, and most of its other colors need under 10. Add a little extra on any color you buy by the skein. A common rule for tent stitch is 1.5 to 2 yards of thread per square inch, which you can use to estimate a background. Try the thread calculator for your mesh.
Finish it and build a street
- Standing house: trim close to the outline, glue onto mat board cut to shape, back with felt and add a small wooden or board base so it stands.
- Flat hanging ornament: board, felt back and cording. At about 9 in wide on 18 mesh, ours make large ornaments or door hangers. See how to finish a needlepoint ornament.
- Framed street: stitch three or four buildings, add a background, and frame them side by side.
- Pillow: one building on 13 mesh makes a pillow front of about 12 in; sew a fabric back with a 1/2 in seam.
You don't have to stitch the whole village at once. Start with a single building, then add another house or village store when you want to extend the street. Stitching every building on the same mesh keeps the street in scale.
Step by step
- Choose a building and mesh Pick a chart and decide on 13 mesh (about 12 in wide) or 18 mesh (about 9 in wide).
- Cut and prepare the canvas Cut mono canvas 3 in larger than the design on every side, tape the edges and mount it on stretcher bars.
- Mark the center Find the canvas center and the chart center. Optionally trace the outline with a tested permanent marker.
- Stitch details first Work windows, doors and trim first, then walls and roof, then large single-color areas.
- Decide on a background Leave it unstitched for a cut-out house, or fill a background in one color for a framed piece.
- Block and finish Block the canvas square, then finish it as a standing house, ornament, framed street or pillow.
Questions
Is Le Point Studio Christmas Village still in stock?
Stock changes often and restocks tend to sell out fast. Check Le Point Studio's own site, which emails you when a canvas is back. If you'd rather not wait, a free chart lets you stitch a village building on plain canvas.
Why are needlepoint canvases so expensive now?
Most are hand-painted one at a time by an artist, so you pay for hours of painting before you stitch. Hand-painted canvases commonly run from about $50 for small designs to $200 or more. A chart on blank canvas skips that cost.
How to paint a needlepoint canvas from a chart?
Find the center of chart and canvas, then mark the design on the canvas square by square with waterproof markers or acrylic paint. Test every marker for bleeding with a spray of water first. You can also skip painting and stitch by counting.
What size is a needlepoint Christmas village building?
It depends on the stitch count and mesh. Our buildings are about 150 to 160 stitches wide, so they finish about 12 in wide on 13 mesh and about 9 in wide on 18 mesh.
Do I have to stitch a background?
No. Our charts have no background fill. Leave it bare if you will cut the building out for a standing house or ornament, or add one color around it for a framed panel.