New: free Santa, snowman, tree, nutcracker and stocking charts →
Free chart

Learn / Needlepoint / Continental stitch

Needlepoint guide · updated 2026-11-10

Continental stitch needlepoint: how to work each row

Continental stitch is a needlepoint tent stitch worked in straight rows. Each stitch covers one canvas intersection on the front; the thread takes a longer diagonal path on the back. Use it for lettering, outlines and narrow shapes, then use basketweave where a larger area allows diagonal rows.

First rowWork right to left; up at lower left, down at upper right
Return rowWork left to right; up at upper right, down at lower left
FrontEvery stitch keeps the same / slant
BackLong diagonal stitches between adjacent front stitches

What makes a stitch continental?

The visible slant alone does not identify continental stitch. Half cross, continental and basketweave can all look alike from the front. Continental is defined by the route between stitches: the back connects the down hole of one stitch to the next up hole with a long diagonal.

This gives more back coverage than half cross. It also pulls repeatedly in one direction, so a broad area can go out of square. A frame helps control tension; basketweave is usually a better choice for broad fills.

First row: follow the numbered holes

These instructions keep the canvas upright and show a horizontal row worked from right to left. Start at the right-hand end of the row. Bring the needle up at the lower-left hole of the first intersection and take it down at the upper-right hole.

Move one intersection to the left. On the back, travel from hole 2 to hole 3, then make the next front stitch from 3 to 4. Repeat 5 to 6. Odd numbers are up holes; even numbers are down holes.

Three continental tent stitches worked right to left: up at the lower left, down at the upper right, holes numbered 1 to 6. The back, seen through the canvas without mirroring, has long diagonal travel from 2 to 3 and 4 to 5.Continental: first rowWork right to left: up at bottom left, down at top right.Threadon the frontSolidfront: needle goes DOWN at the tipDashedback: needle comes UP at the tip12Numbersodd = up, even = downAFront123456work right to leftBBack, seen through the canvas123456Long diagonal back stitches connect each down hole to the next up hole (2 to 3, 4 to 5). Pale linesshow the front stitches.
Three continental tent stitches worked right to left: up at the lower left, down at the upper right, holes numbered 1 to 6. The back, seen through the canvas without mirroring, has long diagonal travel from 2 to 3 and 4 to 5.Continental: first rowWork right to left: up at bottom left, down at topright.Threadon the frontSolidfront: needle goes DOWN at the tipDashedback: needle comes UP at the tip12Numbersodd = up, even = downAFront123456work right to leftBBack, seen through the canvas123456Long diagonal back stitches connect each downhole to the next up hole (2 to 3, 4 to 5). Pale linesshow the front stitches.
Three continental stitches, right to left. Solid arrows end where the needle goes down; dashed arrows end where it comes up. The back is shown through the canvas, without mirroring.

Return row: reverse the needle direction

Move to the row below and work left to right. For each stitch, come up at the upper right and go down at the lower left. The front still slopes /; only the direction you pass through it changes. The connecting back stitches stay long and diagonal.

If you work left to right but keep coming up at the lower left, you make half cross instead. A back with alternating long slants and short uprights is the clue. You can also turn the canvas half a turn and repeat the first-row motion; keep track of the chart orientation if you choose that method.

Three continental stitches in a return row worked left to right below a finished first row: the needle comes up at the upper right and goes down at the lower left of each intersection. The back, seen through the canvas, has long diagonal travel from each down hole to the next up hole.Continental: return rowReturn left to right: up at top right, down at bottom left.Threadon the frontSolidfront: needle goes DOWN at the tipDashedback: needle comes UP at the tip12Numbersodd = up, even = downAFront: row 2, below row 1123456row 1 (already worked)row 2: work left to rightBBack, seen through the canvas123456The back still has long diagonal connections: each runs from a down hole to the next up hole (2 to3, 4 to 5).
Three continental stitches in a return row worked left to right below a finished first row: the needle comes up at the upper right and goes down at the lower left of each intersection. The back, seen through the canvas, has long diagonal travel from each down hole to the next up hole.Continental: return rowReturn left to right: up at top right, down at bottomleft.Threadon the frontSolidfront: needle goes DOWN at the tipDashedback: needle comes UP at the tip12Numbersodd = up, even = downAFront: row 2, below row 1123456row 1 (already worked)row 2: work left to rightBBack, seen through the canvas123456The back still has long diagonal connections: eachruns from a down hole to the next up hole (2 to 3, 4to 5).
The return row travels left to right with the needle moving from upper right to lower left on each front stitch. The back still has long diagonal connections.

Use continental for small details

Continental fits a single row, a small letter, a stepped outline or a narrow patch between colors. Count one chart square for one canvas intersection. Follow the chart colors while keeping the front slant consistent.

For practice, use the narrow parts of the Tiny Sweet bow or cherry stems. Try one row on spare canvas first, turn the work over, and check the back before stitching the motif. For a full project, start with the beginner needlepoint guide.

Troubleshoot the back and the canvas shape

  • Thin back on every other row: check the return-row up and down holes. You may be alternating continental and half cross.
  • Canvas leaning sideways: loosen your pull, support the work on a frame, and consider basketweave for the remaining broad areas. Pull the thread snug without closing the canvas holes.
  • Bulky tails: secure them beneath existing stitches rather than piling knots behind the design. See starting and ending thread.
  • Running short: half-cross quantities do not automatically cover continental. Use the thread planning guide for the stitch and fiber you chose.

Step by step

  1. Prepare a small practice row Support the canvas and secure the thread tail. Identify the right-hand end of a row on your chart.
  2. Make the first stitch Come up at the lower-left hole and go down at the upper-right hole of one intersection.
  3. Continue right to left Move one chart square left and repeat. Check that the back travel forms long diagonals.
  4. Work the row below left to right Come up at the upper right and go down at the lower left. Keep the same visible slant.
  5. Inspect before continuing Check both rows from the back. Long diagonal connections should appear in both directions.

Questions

Is continental stitch the same as tent stitch?

Continental is one method of working tent stitch. Half cross and basketweave are the other common methods; the front looks similar but the routes on the back differ.

What should continental needlepoint look like on the back?

A horizontal continental row has long diagonal connections between front stitches. Short upright connections suggest half cross instead.

How do you do the second row of continental stitch?

With the canvas kept upright, work the row below from left to right. Come up at the upper right of each intersection and go down at the lower left.

Should I use continental or basketweave for a background?

Use basketweave where the area allows diagonal rows and continental for narrow details or single rows. Basketweave spreads the pull across a large area more evenly.

More needlepoint stitches