New: free Santa, snowman, tree, nutcracker and stocking charts →
Free chart

Learn / Cross stitch / Half cross stitch: one diagonal, a full square

Cross stitch guide · updated 2026-11-10

Half cross stitch: one diagonal, a full square

A half cross stitch is one diagonal across a full chart square. It is one leg of an X, left uncrossed when the pattern calls for a half stitch. Follow the chart for its slant and strand count: a half cross is not a shorter stitch ending at the center of the square.

ShapeOne corner-to-corner diagonal across a full square
DirectionUse the slant stated by the pattern; the example below uses /
ThreadHalf-stitch areas may have their own strand count in the key
BackThis horizontal-row method makes short vertical travel between stitches

Half, quarter and full stitches compared

StitchPath within the square
Full crossTwo full diagonals crossing as an X
Half crossOne full diagonal between opposite corners
Quarter crossA short diagonal from a corner to the center
Three-quarter crossA full diagonal plus a short corner-to-center leg

Check the legend rather than guessing from a small symbol. A full-cross symbol still means a complete X, even though you make it in two passes. See how to read a chart for the key and the beginner hub for full crosses.

Work a row without adding the return leg

In this example, come up at the lower-left corner and go down at the upper-right corner. On the back, move straight down to the next up hole, then make the next diagonal. Repeat across the row. If the chart asks for half stitches, stop there instead of crossing the row on the return.

The back panel uses the same positions as the front, as if looking through the fabric; it is not a flipped photograph. Solid arrows point to down holes. Dashed arrows point to the next up holes.

Three front diagonals each span a whole square, worked left to right from 1 to 2, 3 to 4 and 5 to 6. Between them the back travels straight down from event 2 to 3 and from 4 to 5, seen through the fabric.Half cross stitchExample direction: / , one diagonal per square.Threadon the frontSolidfront: needle goes DOWN at the tipDashedback: needle comes UP at the tipAFront: / diagonals1234561 to 2; 3 to 4; 5 to 6.No crossing leg in this row.BBack: short travel1234562 to 3; then 4 to 5.Look through, do not flip.
Three front diagonals each span a whole square, worked left to right from 1 to 2, 3 to 4 and 5 to 6. Between them the back travels straight down from event 2 to 3 and from 4 to 5, seen through the fabric.Half cross stitchExample direction: / , one diagonal per square.Threadon the frontSolidfront: needle goes DOWN at the tipDashedback: needle comes UP at the tipAFront: / diagonals1234561 to 2; 3 to 4; 5 to 6.No crossing leg in this row.BBack: short travel1234562 to 3; then 4 to 5.Look through, do not flip.
Example / row: front moves 1 to 2, 3 to 4, 5 to 6. Back travel connects 2 to 3 and 4 to 5.

Which way should the diagonal lean?

Some charts want a half stitch to match the bottom leg of your crosses; others use the opposite slant for a particular effect. Read the notes and keep the stated direction throughout that area. The / direction in our diagram is a teaching choice, not a rule for every design.

If the chart gives no clear direction, check its photograph and designer's instructions before filling a large area. For a personal sample, label the chosen direction so you can reproduce it later.

Keep coverage and tension under control

A single diagonal leaves more fabric visible than a full X made with the same thread. That can be intentional in a background. Do not add the crossing leg or extra strands just to hide the fabric unless you are choosing to alter the design.

Check the strand count separately for each half-stitch area. Keep the fabric supported and the thread relaxed enough that the squares remain square. Read cross stitch tips if the cloth pulls or the floss (stranded cotton) twists.

Practice the motion, then complete a real chart

Make the diagram's short row on spare Aida. Then try a motif from Tiny Sweet: work a short run of first legs, then return to complete the crosses required by its key. This lets you learn the motion without turning a full-cross pattern into an unfinished half-stitch design.

Use Tiny Garden or Tiny Woodland for another small project. The counted cross stitch guide helps you keep the rows aligned when colors change.

Stitch the three-diagonal exercise

  1. Set the slant Use / for this exercise. Check the actual pattern before choosing a direction on a project.
  2. Make the first diagonal Come up at 1, the lower-left corner, and go down at 2, the upper-right corner.
  3. Move behind the fabric Travel straight down from 2 to 3 and come up for the next stitch.
  4. Continue the row Go down at 4, come up at 5 and go down at 6. Keep the same tension and slant.
  5. Follow the key to finish Leave the row uncrossed only if half stitches are required. Complete the return legs if the chart calls for full crosses.

Questions

Is half cross stitch the same as a quarter stitch?

No. A half cross spans the whole square diagonally. A quarter stitch runs from a corner to the square's center.

Do half cross stitches always lean the same way as the bottom leg?

No. Follow the pattern's stated direction. The teaching example uses /, but some designs specify the opposite slant.

Do I use half as many strands for a half cross stitch?

No. Half describes one diagonal of the X, not the thread quantity. Use the strand count specified for that stitch in the chart key.

Can I replace full crosses with half stitches?

That changes the coverage and finished appearance. For the supplied design, complete the stitch shown in the key; test substitutions separately if you want a variation.